Epson U220B - TM Two-color Dot-matrix Printer Technical Reference Manual page 85

1. Install EPSON Advanced Printer Driver
Execute the installer "ADT###e.exe," and select modules which you need. The
recommended modules are shown below. Refer to the installation manual for details.
EPSON TM-U220 Receipt
(76mm):
EPSON TM-U220 Receipt
(69.5mm):
EPSON TM-U220 Receipt:
(57.5mm)
Status API:
USB driver:
Note:
For the Manual, Sample program, and each utility, you have to download separately the
ADT###e.exe.
2. Install "USB driver"
When you use a USB interface model printer, you need to install the "USB driver." The
procedure depends on the OS; therefore see the installation manual. If you aren't using a
USB interface model printer, you don't need to install this module.
3. Install "EPSON Net Direct print"
When you use the Ethernet interface model printer with Windows98/95, you need to install
"EPSON Net Direct print." See the installation manual for details. If you aren't using the
Ethernet interface model printer, or aren't using Windows 98/95, you don't need to install
this module.
4. Set up the printer port
After installing APD (and "USB driver" or "EPSON Net Direct print") you need to adjust the
printer port setting for the printer interface model. See the Installation manual and the
User's manual for details.
Note:
When you use the serial interface model printer, you need to adjust serial communication setting
between printer and printer driver. See "Adjusting the DIP Switches" (page 3-15) and "Memory
Switches" (page 3-19) for information on the settings.
5. Test print
Execute test print from the "property" of printer to confirm the setting. If the test print is not
correct, please see the "Notes" on the "User's Manual" and "Status API Reference Manual"
to solve the your problem.
Rev. D
TM-U220 Technical Reference Guide
This module (printer driver) is required for printing on
76mm width receipt.
This module (printer driver) is required for printing on
69.5mm width receipt.
This module (printer driver) is required for printing on
57.5mm width receipt.
This module is required for monitoring the printer. This
module provides API to monitor the printer's status.
This module (device driver) is required for the USB
interface model printer.
Setup 3-39