Epson U220B - TM Two-color Dot-matrix Printer Technical Reference Manual page 56

5. Close the roll paper cover.
6. If you are not using a take-up spool, pull out a small amount of roll paper and close
the roll paper cover; then tear off the paper with the manual cutter. You can skip
steps 6 through 11.
3-10 Setup
4. Insert the roll paper, as shown in the left.
Note:
Note the direction the paper comes off the
roll, as shown in following
When using 2-ply roll paper, be sure that the top
and bottom sheets are aligned at the paper exit.
See below illustration.
7. When using 2-ply roll paper, pull out the
roll paper to the bottom front of the
printer as a guide, as shown in left.
Rev. D