Control Panel
Figure 2 shows the control panel for mechanical timer-
controlled machines.
The ON indicator light shows when a cycle is started
and will stay lit until cycle is complete.
1
CYCLE INDICATOR
ON
ADD BLEACH
WHEN LIT
3
1
ON Indicator Light
2
Pushbutton Cycle Selector Switch
3
ADD BLEACH WHEN LIT Indicator Light
4
CYCLE INDICATOR Dial
Figure 2
The ADD BLEACH WHEN LIT indicator light
indicates, when lit, appropriate time to add bleach.
The CYCLE INDICATOR dial displays current cycle
step.
The depressed pushbutton on the cycle selector switch
indicates currently selected cycle.
10
Operation
2
WASH CYCLES
HOT
WARM
WARM
COLD
HEAVILY
PERM-
NORMAL
DELICATE
SOILED
PRESS
WASH
KNITS
B002R
4
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operating Instructions
1. Turn on the main power source (circuit breaker).
For non-coin models: Turn on the On/Off switch
on the front panel to the On position. Refer to
Figure 4.
2. Push button and turn handle clockwise to open.
Refer to Figure 3.
B002R
For non-coin models: Press and hold the DOOR
UNLOCK button on the left side of the control
panel while performing the above step. Refer to
Figure 3 and Figure 4.
DOOR UNLOCK
U001IE1B
U001IE1B
Figure 3
On
Off
U135R
Figure 4
U135R
F232134