How To Assemble Your Monitor Hardware - BenQ M2700HD User Manual

4. How to assemble your monitor hardware

If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Unpack the monitor.
Carefully lift the monitor, turn it over and place it upright
on its stand on a flat even surface.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate
voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor
surround and controls.
Always move or angle the monitor by holding both left
and right sides (Figure I), or the top of the screen and the
monitor stand (Figure II).
Holding the bottom of the screen (Figure III) is prohibited
as the bottom of the screen may be damaged.
I
II
III
How to assemble your monitor hardware 9