BenQ M2700HD User Manual page 36

OSD Lock
Press to leave the
MENU
DDC/CI*
CEC
Source Auto
Search
(available
when the
source is
D-sub, DVI,
and HDMI)
36 How to adjust your monitor
Prevents all the monitor
settings from being
accidentally changed.
When this function is
activated, the OSD
controls and hotkey
operations will be
disabled.
OSD Settings
Allows the monitor
settings to be set through
the software on the PC.
When this function is
activated, the monitor can
be switched on or off by
the connected multimedia
device's remote control
through HDMI
connection. Note that the
connected device is
required to support CEC
(Consumer Electronics
Control) feature as well.
When this function is
activated, D-sub, DVI, and
HDMI ports will be in the
input auto select loop.
Otherwise, these sources
can only be selected by
input select or by hot key.
Press the or
change the settings.
To unlock the OSD
controls when the OSD is
preset to be locked, press
and hold the "MENU" key
for 15 seconds to enter
the "OSD Lock" option
and make changes.
Alternatively, you may
use the
select "NO" in the "OSD
Lock" submenu from the
"OSD Settings" menu,
and all OSD controls will
be accessible.
menu.
Press the
ENTER
select this option. Press the
or keys to change
the settings.
Press the
ENTER
select this option. Press the
or keys to change
the settings.
Press the
ENTER
select this option. Press the
or keys to change
the settings.
If the source is
Component, Composite, or
S-Video, this option will be
disabled.
• YES
keys to
• NO
keys to
or
key to • ON
• OFF
key to • ON
• OFF
key to • ON
• OFF