BenQ M2700HD User Manual page 12

3. Connect the audio cable.
To Input Audio Signals
Connect the provided audio cable between the socket on
the rear of the monitor (Line In) and your computer
audio outlet.
If the video source is Component, Composite, or S-Video,
see:
• To Connect the Component Cable on page 11
• To Connect the Composite Cable on page 11
• To Connect the S-Video Cable on page
To Output Audio Signals
You are provided with the following options to output
audio from the monitor:
• You may connect headphones to the headphone jack
found on the left side of the monitor. See picture on the
right.
• You can use a suitable audio cable (usually purchased
separately or came with the audio device your monitor is
connecting to) to connect the S/PDIF socket on the
monitor to external speakers or headphones that are
S/PDIF compatible.
• If you prefer using external speakers, please also use
another audio cable (usually supplied with the speakers)
to connect the monitor (Line Out) to the input/Line In
jack of the speaker.
• Or you can output audio using the built-in speakers on
the monitor.
The output priority of the audio signals detected on your
monitor is headphone jack, S/PDIF socket, Line Out
socket, and the built-in speakers. In other words, the
audio cables connected to the audio output sockets on
the monitor determine the order of the audio output.
12 How to assemble your monitor hardware
11.
II
I
III
IV