Selecting The Video Input Source; Using The On-Screen Menus - Dynex DX-32L200A12 User Manual

Understanding the basics

Selecting the video input source

To select the video input source:
1
Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
2
Press or to highlight the video input source,
then press ENTER. You can also press a direct input
button on the remote control to select the video
input source.
• Press VIDEO to select the device connected to
the AV IN jacks.
• Press HDMI one or more times to select the
device connected to the HDMI 1 or HDMI 2 jack.
• Press TV to select the TV input source.
• Press COMP to select the device connected to
the COMPONENT video jacks.

Using the on-screen menus

• Depending on the signal source selected, you
may see different options on your screen. The
following menus are shown in TV mode (except
a USB menu in USB mode.).
• Menu items that are not selectable are grayed
out.
• Menus in this manual are described in TV mode,
unless otherwise indicated.
• The screens shown in this manual are for
explanation purposes and may vary from the
actual screens on your TV.
Picture menu (TV mode)
DX-32L200A12/DX-37L200A12/DX-46L262A12
Audio menu (TV mode)
Settings menu (TV mode)
Channels menu (TV mode)
USB menu (USB mode)
17