Dynex DX-32L200A12 User Manual page 13

Making connections
Using DVI (same as HDMI but requires an audio
connection)
To connect a cable or satellite box using DVI:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect it
to the DVI OUT jack on the cable or satellite box.
4
Connect the other end of the HDMI cable to the
HDMI1 or HDMI 2 jack on the side of your TV.
Cable or satellite box
5
Connect a 3.5 mm audio cable (not provided) to the
L and R AUDIO jacks on the side of your TV and to
the AUDIO OUT jack on the cable or satellite box.
6
Turn on your TV, then turn on the cable or satellite
box.
7
Go through the setup wizard on page 15.
Side of TV
HDMI cable with HDMI-DVI adapter
DX-32L200A12/DX-37L200A12/DX-46L262A12
Using component video (better)
To connect a cable or satellite box using component
video:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a component video cable (not provided) to
the COMPONENT IN/Y, P
your TV and to the component video out jacks on
the cable or satellite box.
Cable or satellite box
4
Connect an audio cable (not provided) to the L, R
audio jacks on the side of your TV and to the audio
out jack on the cable or satellite TV box.
5
Turn on your TV, then turn on the cable or satellite
box.
6
Go through the setup wizard on page 15.
, P jacks on the side of
B R
Side of TV
Component video cable
9