Connecting Power; Connecting A Cable Or Satellite Box - Dynex DX-32L200A12 User Manual

8
DX-32L200A12/DX-37L200A12/DX-46L262A12

Connecting power

To connect the power:
• Connect the AC power cord to the AC IN jack on the
back of your TV, then plug the other end into a
power outlet.
• Your TV should only be operated from the
power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
TV for an extended period of time.

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one
connection type. To get the best video, you should use
the best connection type available. For more information,
see "What connection should I use?" on page 7.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect an HDMI cable (not provided) to one of the
HDMI jacks on the side of your TV and to the HDMI
OUT jack on the cable or satellite box.
Cable or satellite box
4
Turn on your TV, then turn on the cable or satellite
box.
5
Go through the setup wizard on page 15.
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
Making connections
Side of TV
HDMI cable