Installing A Drive Into The 3.5-Inch External Drive Bay - Compaq dx1000 - Microtower PC Service & Reference Manual

4. If you are removing a diskette drive, disconnect the data cable (1) and power cable (2) from the
back of the drive.
Figure 6-24
5. If you are removing a media card reader, disconnect the USB cable from the system board.
Figure 6-25

Installing a Drive into the 3.5-inch External Drive Bay

The 3.5-inch external drive bay on the front of the computer can be configured with a media card reader
or a diskette drive.
1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the front bezel
Disconnecting the Diskette Drive Cables
Disconnecting the Media Card Reader Cable
(Front Bezel on page
(Preparation for Disassembly on page
(Computer Access Panel on page
35).
30).
34).
Drives 53