Compaq dx1000 - Microtower PC Setup Manual
Computer setup (f10) utility guide microtower model
Hide thumbs
Also See for dx1000 - Microtower PC:
- Troubleshooting manual (21 pages) ,
- Hardware reference manual (59 pages) ,
- Service & reference manual (98 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Compaq dx1000 - Microtower PC
Summary of Contents for Compaq dx1000 - Microtower PC
- Page 1 Computer Setup (F10) Utility Guide - dx1000 Microtower Model Compaq PC...
- Page 2 No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Computer Setup (F10) Utility Guide Compaq PC dx1000 Microtower Model First Edition (February 2009) Document Part Number: 534766-001...
-
Page 3: About This Book
About This Book This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance purposes. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. - Page 4 About This Book ENWW...
-
Page 5: Table Of Contents
Table of contents Computer Setup (F10) Utility Computer Setup (F10) Utilities ......................1 Using Computer Setup (F10) Utilities .................. 1 Computer Setup—Main ....................... 2 Computer Setup—Advanced ....................3 Computer Setup—Power ..................... 4 Computer Setup—Boot ......................5 Computer Setup—Exit ......................5 Recovering the Configuration Settings .................... - Page 6 ENWW...
-
Page 7: Computer Setup (F10) Utility
Computer Setup (F10) Utility Computer Setup (F10) Utilities Use Computer Setup (F10) Utility to do the following: ● Change factory default settings. ● Set the system date and time. ● Set, view, change, or verify the system configuration, including settings for graphics, audio, storage, communications, and input devices. -
Page 8: Computer Setup-Main
● Boot ● Exit Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc. CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. -
Page 9: Computer Setup-Advanced
● Memory Bank 4 ● BIOS Revision ● Core Version ● Model Number ● Product Number ● Asset Tag (press Enter to change) Computer Setup—Advanced NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. WARNING! Setting items on this menu to incorrect values may cause your system to malfunction. -
Page 10: Computer Setup-Power
Table 2 Computer Setup—Advanced (continued) USB Legacy Mode Allows you to set: Support ● Disabled ● Enabled Onboard LAN Allows you to disable/enable onboard LAN controller. Onboard LAN Boot Allows you to disable/enable the boot ROM of the onboard LAN chip. SATA1 Controller Allows you to disable/enable the SATA1 Controller. -
Page 11: Computer Setup-Boot
Computer Setup—Boot NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 4 Computer Setup—Boot Option Description Boot-time Diagnostic Disables/enables POST diagnostic messages display. Screen 1st Boot Device Allows you to specify which device groups will boot first, second, third, and fourth or to disable any of the four: 2nd Boot Device ●... -
Page 12: Recovering The Configuration Settings
Table 5 Computer Setup—Exit (continued) Discard Changes Press Enter to discard changes. Save Changes Press Enter to save changes. Recovering the Configuration Settings To reset all BIOS Setup options to their default values (including options for Ctrl+F10), you must enter F10 Setup mode and press F5.
Need help?
Do you have a question about the dx1000 - Microtower PC and is the answer not in the manual?
Questions and answers