NEC LCD2070VX - MultiSync - 20" LCD Monitor User Manual page 8

Display Setup
0. Connect the power cord to the power outlet (Figure 0).
NOTE: If you have difficulty removing the cable cover, please push
the the cover up (towards the top of the monitor) in order to unhook
the cover from the stand, then remove, as shown in (Figure ).
Handle with care when removing cable cover.
NOTE: If you use this monitor at AC25-240V, please refer to
Recommended Use section of this manual for proper selection of
power cord.
. The vacation switch on the back side of the monitor must be turned
on (Figure 0). Turn on the monitor with the front power button and
the computer.
NOTE: The vacation switch is a true on/off switch. If this switch is
on the OFF position, the monitor cannot be turned on using the
front button. DO NOT switch on/off repeatedly.
- continued
Figure 0
Power Button
Figure 
OFF Position
Vacation
Switch
ON Position
6