Removing The Panel Unit - Epson FX 1170 - B/W Dot-matrix Printer Service Manual

REV.-A

3.2.2 Removing the PANEL UNIT

[STEP
11
Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover and tractor unit.
(See Section 3.2.1.)
[STEP 21 Push the two clips on the bottom of the panel unit and remove the PANEL UNIT.
[STEP 3] Remove the flexible flat cable (FFC cable).
PAN
The FFC cable must be connected properly, as shown below.
F a c e
I
terminals at ~he end ~
of the cable.
Figure 3-3. Removing the PANEL UNIT
Assembly Note
Plain Face
4
w i t h e x D o s e d
I
Figure 3-4. Connecting
the
3-6