REV.-A
Removing the BOARD ASSEMBLY, C076 PSB/PSE
3.2.7
Do not touch the heat sink attached to the FET (Ql) when the printer is powered. If you touch the
heat sink, you may suffer from electric shock.
[STEP 1]
Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover and tractor unit.
(See Section 3.2.1.)
[STEP 2]
Remove the PANEL UNIT. (See Section 3.2.2.)
[STEP 3]
Remove the HOUSING ASSEMBLY,
[STEP 4]
Remove the PRINTER MECHANISM. (See Section 3.2.5.)
[STEP 5]
Remove the three CBB (M3X12) screws and the two CBC (M3X8) screws on the BOARD ASSEMBLY,
Remove the BOARD ASSEMBLY, C076 PSB/PSE.
[STEP 61
Figure 3-26. Removing the BOARD ASSEMBLY, C076 PSB/PSE
WARNING
3-24
'
.. - , . =