3.
Locate the connector for the mouse. Refer to "Locating connectors on the
front of the computer" and "Locating connectors on the rear of the computer".
Note: Your mouse might be connected to the standard mouse connector
at the rear of the computer or to a USB connector
rear of the computer.
4.
Disconnect the failing mouse cable from the computer.
5.
Connect the new mouse cable to the connector.
6.
Refer to the "Completing the installation."
Replacing the External speaker
1.
Before removing any media (diskettes, CDs, or memory cards) from the drives,
shut down the computer, and turn off all attached devices.
2.
Unplug all power cords from electrical outlets.
3.
Locate the Speaker. Refer to "Locating connectors on the rear of the computer"
and "Locating connectors on the front of the computer". Your speaker might be
connected to the Audio connector
rear of the computer. Locate the connector for the speaker.
4.
Disconnect the failing speaker cable from the computer and connect the new
speaker cable to the same connector.
5.
Refer to the "Completing the parts replacement".
18
Hardware Replacement Guide
31035102_3000 H_HRG_EN.indd 18
at either the front or
to a Audio connector at either the front or
2008.8.21 2:19:31 PM