Completing the installation
After replacing the parts, you need to close the computer cover and reconnect
cables, including telephone lines and power cords. Also, depending on the part
that was replaced, you might need to conﬁrm the updated information in the Setup
Utility program. Refer to "Starting the Setup Utility" in the User Guide or in the
Hardware Maintenance Manual.
To complete the part installation: (Completing the part installation of
your actual computer should be taken as the ﬁnal.)
Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside your computer. Refer to "Locating components"
for the location of the various components.
Make sure that the cables are routed correctly before installing the computer
Correctly route all power supply cables to avoid interference with the drive
bay assembly. Keep cables clear of the hinges and sides of the computer
31035102_3000 H_HRG_EN.indd 19
Hardware Replacement Guide
2008.8.21 2:19:32 PM