6.
Slide the new optical drive into the bay from the back until it snaps into
position.
7.
Screw back the two screws on the bay.
8.
Connect the data and power cables to the drive.
9.
Install the front bezel. Refer to "Removing and replacing the front bezel".
10. Refer to the "Completing the installation".
Replacing the keyboard
Attention
Do not remove the computer cover or attempt any repair before reading the
"Important safety information" in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at
http://consumersupport.lenovo.com
16
Hardware Replacement Guide
31035102_3000 H_HRG_EN.indd 16
2008.8.21 2:19:28 PM