Video; Supported Video Modes - Dell External OEMR R910 Technical Manual

Dell

14 Video

The R910 Integrated Dell Remote Access Controller 6 (iDRAC6) incorporates an integrated video
subsystem, connected to the 32-bit PCI interface of the ICH10. This logic is based on the Matrox
G200. The device only supports 2D graphics.
The video device outputs are multiplexed between the front and rear video ports. If a monitor is
connected to the front video connector, it will take precedence over the rear connection, thereby
removing the display from the rear connection.
The integrated video core shares its video memory with the iDRAC6's 128 MB DDR2 application space
memory. This memory is also used for the KVM buffer.
The R910 system supports the following 2D graphics video modes:
Dell PowerEdge R910 Technical Guide
Table 13.
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024

Supported Video Modes

Refresh Rate (Hz)
60, 72, 75, 85
56, 60, 72, 75, 85
60, 72, 75, 85
75
60, 75, 85
60
Color Depth
(bit)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16
32
55