Dell External OEMR R910 Technical Manual page 73

Technical guide
Hide thumbs Also See for External OEMR R910:
Table of Contents

Advertisement

Dell
How is data input to this memory?
How is this memory write protected?
Remarks
Server CPLD Devices (x2 per baseboard)
Size:
Type [e.g., Flash PROM, EEPROM]:
Can user programs or operating system
write data to it during normal operation?
Does it retain data when powered off?
Purpose? [e.g., boot code]
How is data input to this memory?
How is this memory write protected?
Remarks
®
Broadcom
5709/57711 PCI-e Network Interface Controller Flash
Size:
Type [e.g., Flash PROM, EEPROM]:
Can user programs or operating system
write data to it during normal operation?
Does it retain data when powered off?
Purpose? [e.g., boot code]
How is data input to this memory?
How is this memory write protected?
Remarks
Broadcom 8727 PHY (Physical Layer) EEPROM (applicable to only 10Gb I/O riser)
Size:
Dell PowerEdge R910 Technical Guide
Data is pre-programmed by vendor. Keys are
updated using TPM enabled operating systems.
Software write protected
F2 BIOS setup option to enable/activate/clear
2280 macro-cells and 256 macro-cells
Internal Flash EEPROM
No
Yes
System power sequence control, error/config
detection, and BIOS-BMC interaction.
Programming CPLD(s) requires a vendor-
provided logic file and loader program which is
executed by booting up the system from a
floppy or OS-based executable containing the
logic file and the loader. System loaded with
arbitrary data in CPLD(s) will not operate.
Software write protected
Need AC cycle after updating CPLD
1MB
Serial Flash
No
Yes
Embedded Network Controller FW and config
data
Loading flash memory requires a vendor-
provided firmware file and loader program
which is executed by booting up the system
from a floppy or OS-based executable
containing the firmware file and the loader.
System loaded with arbitrary data in firmware
memory would not have the network ports
operational.
Software write protected
There is a quantity of 2 SPI flash on both the I/O
risers. On 1GbE I/O riser, both flash parts are
for the two 5709C controllers where as on 10Gb
I/O riser, one is for 5709C and the other one is
for 57711 network controller.
32KB
73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge r910

Table of Contents