Eaton DX 10000LXL User Manual page 10

Important Note: If the UPS is used in Single Mode, JP1 and JP2
must be connected by 10AWG (6mm
Mode, the Jumper between JP1 and JP2 must be removed.
● Option: 1
Connection Details of Output Terminals.
Connection Details of Output Terminals.
Connect Output Line 1 and Output Neutral 1 for 120V / 3KVA Load or connect by
2
10AWG (6mm ). Output Line 2 and Output Neutral 2 for 120V / 3KVA Load.
Connection Details of Output Terminals
2
). If the UPS is used in Parallel
8