Installing the Processor
1.
Insert the processor into the processor socket. Ensure the processor is properly seated.
2.
Tighten the cam-screw in a clockwise direction to the locked position.
3.
Install:
a) heat-sink fan assembly
b) palmrest
c) keyboard
d) battery
4.
Follow the procedures in
Removing the System Board
1.
Follow the procedures in
2.
Remove:
a) battery
b) SD memory card
c) keyboard
d) optical drive
e) memory module
f) palmrest
g) hard drive
h) WLAN card
i)
heat-sink fan assembly
3.
Disconnect the display cable (1), power-connector cable (2), USB board cable (3), speaker cable (4).
26
After Working Inside Your Computer .
Before Working Inside Your Computer .