Installing The System Board - Dell Vostro 2520 Owner's Manual
Owner's manual
Hide thumbs
Also See for Vostro 2520:
- Setup and features information (7 pages) ,
- Setup and features information (7 pages)
Table of Contents
Advertisement
4.
Remove the screws that secure the system board.
5.
Lift up the system board at an angle and slide it out from the LAN, VGA, HDMI, and USB sockets.
Installing the System Board
1.
Insert the system board with the LAN, VGA, HDMI, and USB connectors into their respective sockets and align the
system board in place.
2.
Install the screw that secure the system board in place.
3.
Connect the LCD cable, power connector cable, USB board cable, audio board cable, coin-cell battery cable, and
the speaker cable.
4.
Install:
27
Hide quick links:
Advertisement
Table of Contents
