Installing the Hard Drive
1.
Install the hard-drive bracket to the hard drive.
2.
Tighten the screws that secure the hard-drive bracket.
3.
Place the hard drive in its compartment and slide it towards the SATA connector to secure it to the system board.
4.
Install:
a) palmrest
b) keyboard
c) battery
5.
Follow the procedures in
Removing the Wireless Local Area Network (WLAN) Card
1.
Follow the procedures in
2.
Remove:
a) battery
b) keyboard
c) palmrest
3.
Disconnect the antennae connected to the WLAN card.
4.
Pry the latch to release the WLAN card from its compartment.
After Working Inside Your Computer .
Before Working Inside Your Computer .
19