Selecting Automatic Tracking; Selecting / Deleting Direct Programming; Switching Mute On/Off - Sony MEX-100NV Operation Manual

7890_GB.book Seite 121 Montag, 1. Juli 2002 1:20 13

Selecting automatic tracking

Only applies when TMC is switched off.
In all modes and wavebands, automatic tracking can be
switched on by pressing TP for more than 2 seconds.
To switch on automatic tracking in the TP menu, press the
multifunction button repeatedly until
displayed.
Attention: If a TP transmitter has already been
programmed directly, it will once again be
selected as the TP transmitter.

Selecting / deleting direct programming

Only applies whenTMC is switched off.
Activate the TP menu.
Selecting: Press the multifunction button.
Using the SELECT control, select the desired TP transmitter.
After a short delay and without actuation, the selected
transmitter is accepted.
Deleting: Press the multifunction button.
is
Using the SELECT control, select
confirm. After a short delay and without actuation, the direct
programming is deleted.
Quit the TP menu.

Switching mute on/off

After selecting a TP or EON transmitter, the mute function
can be activated by briefly pressing TP.
Thereafter, only traffic announcements and navigation
announcements will be switched through. After pressing TP
again, muting is cancelled.
Radio mode
and press to
121