Interrupting Tp Announcements; Tp Announcement Volume; Switching Tmc On/Off - Sony MEX-100NV Operation Manual

7890_GB.book Seite 122 Montag, 1. Juli 2002 1:20 13
Radio mode

Interrupting TP announcements

During a TP announcement, briefly press TP.
The announcement currently being broadcast will be
interrupted and the system will automatically return to the
previously selected mode.

TP announcement volume

Activate the TP menu. Press the
Using the SELECT control, four different settings ( - ) can
be selected. This means that the volume can be raised to a
fixed value according to the setting.
• Setting - no volume increase
• Setting - slight volume increase
• Setting - medium volume increase
• Setting - large volume increase
122

Switching TMC on/off

Note:
Activate the TP menu.
multifunction button.
Switching on:
Press the
is displayed.
If TMC is switched on, a traffic programme transmitter
cannot be selected freely. A TMC station is selected by the
unit, provided one can be received. This transmitter then
corresponds to the traffic programme transmitter.
Switching off:
Press the
is displayed.
If TMC is switched off, a traffic programme transmitter can
be selected freely.
Note:
You can find further information on TMC under
"Dynamic navigation with TMC" auf Seite 98.
multifunction button repeatedly until
multifunction button repeatedly until
Dynamic navigation functions (dynamic route,
traffic information) cannot be selected or called
up.