Sony MEX-100NV Operation Manual page 88

7890_GB.book Seite 86 Montag, 1. Juli 2002 1:20 13
Navigation operation
Select the required location using the SELECT control and
press to confirm.
If more than 20 locations share the same post code, the dis-
play will show the location input menu instead of the above-
mentioned list. In that case, the location name is to be entered
as described in "Entering the destination" on page 84.
The program returns to road or centre entry. If there are no
streets in the selected town or only the centre can be selected,
the unit will switch directly to the route menu.
Entering the destination road
Using the SELECT control, select
firm.
Select the letters one after the other by turning the SELECT
control and press to confirm. The enlarged selected letter ap-
pears at the right of the display.
Using the multifunction button
ter is deleted.
86
The complete entry is deleted if the multifunction button
Letters which are already entered are displayed inversely. For
the purpose of support, the existing entry is displayed at the
next road to be reached. The unit offers only the possible re-
maining letters for selection.
If no other entries are available, the unit completes the road-
name.
To accept the entry, press and hold the SELECT control for
and press to con-
more than 2 seconds or select the small tick
press the SELECT control.
If the complete road-name was previously entered or was au-
tomatically completed, the program switches to either road-
H
distinguishing list or to route menu.
If an incomplete location entry was confirmed, the road selec-
tion list is displayed.
the last confirmed let-
is pressed for more than 2 seconds.
E
and briefly