Sony MEX-100NV Operation Manual page 113

7890_GB.book Seite 111 Montag, 1. Juli 2002 1:20 13
Selecting the measuring unit
Select from the system settings menu and
confirm.
Select the measuring unit using the SELECT control. The
measuring unit is accepted by pressing the control.
The system returns to the system settings menu.
Note: indicates
indicates calculation in yards.
Influencing the calculation of ETA
Select and confirm
tings menu.
ETA stands for Estimated Time of Arrival.
SPORTIY
N O R M A L
LOW-RISK
Use the SELECT control to select the desired setting.
•
SPORTIY
With this setting the unit adjusts ETA for faster drivers.
calculation in metres.
An earlier ETA is calculated.
•
NORMAL
This is the default setting. It offers a sufficiently accurate
calculation of ETA for most drivers.
•
LOW-RISK
With this setting the unit adjusts for drivers who may take
longer for the planned journey. This setting could be used,
for example, in areas of dense traffic.
Selection is confirmed by pressing the control.
The system returns to the system settings menu.
Navigation operation
in the system set-
111