Inserting / Ejecting Cds; Track Skip - Forwards / Backwards; Scan Search - Sony MEX-100NV Operation Manual

7890_GB.book Seite 125 Montag, 1. Juli 2002 1:20 13

Inserting / ejecting CDs

Press and hold / ; the display folds downwards and the
CD slot becomes visible. Insert the disc into the CD slot with
the printed side upwards. The unit pulls in the CD automati-
cally and begins to play the disc from the first track. Then fold
the display up again.
After playing the last track, the unit automatically begins to
play the first track of the CD again.
If there is already a CD in the slot, press CD. If CD changer /
AUX operation was last selected, use the multifunction but-
ton to switch to CD operation.
K K
To eject a CD, press and hold
wards and the CD is ejected. Remove the CD. Then fold the
display up again.
Attention : The CD is not ejected when the unit is
switched off but remains in the CD slot.

Track skip - forwards / backwards

Press the multifunction button
(backwards).
By pressing the multifunction button repeatedly, several
tracks can be skipped over in forward or reverse directions.
The unit switches to the first track when the last track has
been reached. Analogously, it switches from the first track to
1 3 8
the last track.
If the track has been playing for longer than 10 seconds when
the track skip function is triggered, the device returns to the
beginning of the track.
/ ; the display folds down-

Scan search

Press the SELECT control,
All following CD tracks are played for 10 seconds each. Press
the SELECT control again to terminate the scan search.
CD mode
(forwards) or
K
1 3 8
K K
appears on the display.
1 3 8
K K
K
125