Cassette Player Operation; Listening To Tape Playback; Ejecting The Cassette; Fast-Winding The Tape - Sony XR-6450 Operating Instructions Manual

Cassette Player
Operation
—— eee
Listening to Tape Playback
After inserting the cassette, playback
will start automatically.
If a cassette is already inserted, press
the button to start playback.
If you press during playback, the tape
transport direction will change.
Indication of Tape Transport Direction
( TAPE © |
The side facing up is being played.
{ TREE 6)
The side facing down is being played.
To stop playback,
eject the cassette by pressing the (=) button or
press the OFF button.
Playback stops also when you select radio by
pressing the or ea button.
Ejecting the Cassette
Press the (2) button.
Fast-winding the Tape
Gr=TD
Rewind Fast-forward
To start playback during rewinding or fast-
forwarding, press the button.
_
Playing a Tape Recorded
in the Dolby B NR System
Press the button when you want
to listen to a tape recorded in the
Dolby B NR system. — "DO" appears in
the display.
To cancel, press again.
Playing a CrO2 or Metal
Tape
Press the button when you want
to listen to a CrO2 (TYPE Il) or metal
(TYPE IV) tape. — "MTL" will appear on
the display.
To cancel, press again.
Locating the Beginnings
of the Tracks
— AMS (Automatic Music Sensor) Function
During playback, press either side of
the SEEK/AMS button the number of
times you wish to skip the tracks.
SEEK | +° SEEK
| AMS | PPt AMS
To locate the To locate the
previous tracks succeeding tracks
Up to nine tracks can be skipped.
If the blanks between the tracks are shorter
than four seconds, or if there are noises, the
AMS function will not work. Also, the unit
may read long sections of low volume music
or quiet sections on a track as blanks between
tracks.