Table of Contents
Advertisement
Checklist
The following items should be supplied in the box. Check before starting the installation and
contact your dealer if an item is missing.
NOTE: An antenna is NOT provided. Consult your Eagle dealer for advice if necessary.
1.
Mounting gimbal for the VHF radio
2.
Power supply cable with inbuilt 7 Amp
fuse
3.
External speaker connection cable with
white (+) wire and black (-) wire
4.
GPS/COM connection cable
5.
Two mounting knobs
6.
Microphone bulkhead mount
7.
Four self-tapping screws for the mounting
gimbal
8.
Four flat screws for the mounting gimbal
9.
Four spring washers for the mounting
gimbal
10. Four plain washers for the mounting
gimbal
11. Four nuts for the mounting gimbal
12. Two self-tapping screws for the
microphone bulkhead mount
13. Two flat screws for the microphone
bulkhead mount
6
1
2
3
4
EAGLE - EVR-150 Installation and Operation Instructions
14. Two spring washers for the microphone
bulkhead mount
15. Two plain washers for the microphone
bulkhead mount
16. Two nuts for the microphone bulkhead
mount
17. Two flush-mount brackets for recessed
installation
18. Two M5x32 screws for recessedinstallation
19. Two M5x10 screws for recessed installation
20. Two plastic stoppers for the recessed
installation (not pictured)
21. Installation template (not pictured)
22. One 7 Amp spare fuse (not pictured)
in case of accidental reverse of battery
polarity
23. Base unit and microphone (not pictured)
5
6
18 & 19
17
7
8
9
10
11
12
13
14
15
16
Advertisement
Table of Contents
