Delete An Entry; Local Or Distance Sensitivity (Local/Dist); Set Distance Sensitivity; Set Local Sensitivity - Eagle EVR-150 Installation And Operation Instructions Manual

2-2-3 Delete an Entry

BUDDY LIST
>MANUAL NEW
ALEX
TOM
1. Select BUDDY LIST. Press ENT to display the list of entries.
2. Scroll down (if required) to the entry you want to delete and press ENT.
3. Select DELETE then select YES.
4. The entry is deleted immediately and the buddy list is displayed again.

2-3 Local or Distance Sensitivity (LOCAL/DIST)

MENU SELECT
BUDDY LIST
>LOCAL/DIST
BACKLIGHT

2-3-1 Set Distance Sensitivity

SENSITIVITY
>DISTANT
LOCAL

2-3-2 Set Local Sensitivity

SENSITIVITY
DISTANT
>LOCAL
LOCAL is displayed on the LCD as a reminder that local sensitivity is selected.

2-4 Backlighting (BACKLIGHT) and Contrast (CONTRAST)

MENU SELECT
LOCAL/DIST
>BACKLIGHT
CONTRAST
BUDDY LIST
MANUAL NEW
ALEX
>TOM
Use LOCAL/DIST to improve the sensitivity of the receiver either
locally (LOCAL) or over distances (DIST).
LOCAL is not recommended for use in open sea conditions. It is
designed for use in areas of high radio noise; for example, close to
cities.
See also SQL (Squelch Control) in Section 1.6.
1. Select LOCAL/DIST then select DIST.
2. Press ENT to activate the DIST setting. This disables local sensitivity
and the menu is displayed again.
Use BACKLIGHT to set the backlight levels for the LCD and the
keypad at a comfortable level.
The microphone keypad backlighting is either ON or OFF.
Use CONTRAST to set the contrast level for the LCD.
EAGLE - EVR-150 Installation and Operation Instructions
TOM
EDIT
>DELETE
1. Select LOCAL/DIST then scroll to
LOCAL.
2. Press ENT to activate the LOCAL setting.
This disables distance sensitivity and
the menu is displayed again.
DELETE BUDDY
TOM
>YES
NO
21