Sharp MX-C400P Software Setup Manual page 13

• Machine connection method: LPR Direct Print (Auto Search)
• Set as default printer: Yes
• Printer driver name: Cannot be changed
• Display fonts: Installed
If you selected [Custom installation], select [LPR Direct Print (Auto Search)] and
click the [Next] button.
If you selected other than [LPR Direct Print (Auto Search)], see the following
pages:
• LPR Direct Print (Specify Address): page 14
• IPP: page 18
• Shared printer: page 29
• Connected to this computer: page 21
3
Printers connected to the
network are detected.
Select the machine and
click the [Next] button.
• If the machine is not found, make sure that the machine is powered on and
that the machine is connected to the network, and then click the [Re-search]
button.
• You can also click the [Specify condition] button and search for the machine
by entering the machine's name (host name) or IP address.
☞
Checking the IP address of the machine (page 6)
4
A confirmation window appears. Check the contents and then click
the [Next] button.
INSTALLING THE PRINTER DRIVER
11