Eagle FISHMARK 640C Installation And Operation Instructions Manual page 55

Sonar Menu (left) with Sensitivity command selected. The Sensitivity
NOTE:
If you want to change the sensitivity in Manual Mode, first turn off
Auto Sensitivity. From the Sonar Page press
|
S
ENSITIVITY
sensitivity setting. When it's set at the desired level press
Important Tip:
While you are experimenting and learning, it's possible to scramble
the settings so that the sonar picture disappears from your screen.
If that happens remember that it's easy to switch back to full auto-
matic operation by restoring the factory auto settings. Here's how:
To Restore Factory Settings
1. Press
MENU
2. The unit asks if you want to reset all the options. Press ← to
| . All options are reset and the unit reverts back to the Full
Y ENT
ES
Sonar Chart.
Control Bar is shown at right.
|↑ to
ENT S
ENSITIVITY
| |↓ to
MENU
. Press ↓ or ↑ to pick a different
|
ENT
|
R O
ESET PTIONS
49
MENU
.
ENT
|↓ to
A
UTO
.
EXIT