Configure Nmea - Eagle FishElite 502c Installation And Operation Instructions Manual

For assistance in configuring the unit to communicate with another
device, consult the factory; customer service phone numbers are in the
back of this manual. Also see the entry below for Configure NMEA. To
set Com Port Configuration:
1. Press
MENU
2. Press ↓ to
C

Configure NMEA

You can configure the unit to use specific NMEA sentences.
1. Press
MENU
2. Press ↓ to
C
3. A menu appears showing the prefixes of the available NMEA sen-
tences. A check mark next to a prefix means the prefix is in use. Use ↑
↓, ← → to select a prefix, then press
NOTE:
The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:
•
GLL transmits latitude and longitude of present position, time
of position fix, and status.
•
RMC and RMB transmits navigation information messages.
•
APB transmits autopilot information.
•
GGA transmits time, position, and fix related data.
•
GSA and GSV transmits fix mode, DOP values, and satellites in
view information.
Menus for changing Com Port settings.
| |↓ to
MENU S
P
OMMUNICATIONS
| |↓ to
MENU S
P
OMMUNICATIONS
|
S ENT
YSTEM ETUP
| .
ENT
ORT
|
S ENT
YSTEM ETUP
| |↓ to
ENT
ORT
to turn off the prefix.
ENT
133
.
.
C NMEA
ONFIGURE
| .
ENT