Communications Port Configuration; Configure Nmea - Eagle FishStrike 2000 Installation And Operation Instructions Manual

Communications Port Configuration

The unit has one NMEA 0183 version 2.0 compatible communication
port. The Com Port Menu, which is accessed from the System Setup
Menu, allows you to configure the communications ports to send or
receive data to another electronic device, such as autopilot.
For assistance in configuring the unit to communicate with another
device, consult the factory. Customer service phone numbers are in the
back of this manual. Also see the entry below on how to Configure
NMEA. To set Com Port Configuration:
1. Press
MENU
↓
2. Press to
C

Configure NMEA

You can configure the unit to use specific NMEA sentences.
1. Press
MENU
2. Press ↓ to
C
3. A menu appears showing the prefixes of the available NMEA
sentences. A check mark next to a prefix means the prefix is in use.
Main Menu (left); MMC File Browser (right).
Menus for changing Com Port settings.
| |↓ to
MENU S
OMMUNICATIONS
| |↓ to
MENU S
OMMUNICATIONS
|
S ENT
YSTEM ETUP
| .
P ENT
ORT
|
S ENT
YSTEM ETUP
| |↓ to
P ENT
ORT
131
.
.
C NMEA
ONFIGURE
| .
ENT