Samsung SCX-6545NX User Manual page 162

MESSAGE MEANING
Paper Misfed from
Paper Jam in MP
multi-purpose tray
tray
Paper misfed from
Paper Jam in tray 1
tray
Or paper has jammed
Paper Jam in tray 2
in the tray feed area.
Or the tray cover is
Paper Jam in tray 2
opened.
(HCF)
Paper Jam in tray 3
Paper Jam in tray 3
(HCF)
Paper Jam in tray 4
Paper jammed in the
Paper jam inside
stacker.
finisher's duplex
Paper has jammed
Paper Jam inside of
during duplex printing.
duplex path
Paper has jammed in
Paper Jam inside of
the registration area.
machine
The CCD (Charged
Scanner locking
Couple Device) lock
switch is locked or
has been locked. The
another problem
CCD does not detect
occurred
its home location or
move.
The toner supply is
Shake toner
low.
cartridge
Stapler is run out.
Staple cartridge is
empty. Replace it
SUGGESTED
SOLUTIONS
Clear the jam. (See "In
the multi-purpose
tray" on page 105.)
Clear the jam. (See "In
the tray 1" on page 101
and see "In the optional
tray" on page 102 and
see "In the optional
high capacity
feeder" on page 103)
Open the stacker door
and remove jammed
paper by lowering
guide 1a or 1b.
Clear the jam. (See "In
the duplex unit area" on
page 106.)
Clear the jam. (See "In
the paper exit area" on
page 105.)
Unlock the CCD lock.
(See "Front view" on
page 18.) Or turn off
the machine and on
again. Try again. If the
problem persists, call
for service.
Thoroughly roll the new
cartridge five or six
times to distribute the
toner evenly inside the
cartridge.
Order Staple Cartridge.
(See "Staple
Cartridge" on
page 120.) And replace
it. (See "Replacing the
Stapler" on page 123.)
MESSAGE MEANING
The staple cartridge is
Staple cartridge is
not installed.
not installed. Install
it in finisher
There is a problem in
System error: [zzz].
the system operation.
Please turn off then
on
The IP address is
This IP address
used in other place
conflicts with an IP
elsewhere.
address already in
use. Check it
The toner cartridge
Toner cartridge is
you have installed is
not compatible.
not for your machine.
Check user's guide
The toner cartridge is
Toner cartridge is
not installed or the
not installed. Install
CRUM (Consumer
it
Replaceable Unit
Monitor) in the
cartridge is not
properly connected.
The toner cartridge is
Toner cartridge is
at the end of its life.
worn. Replace with
When the toner
new one
cartridge replacement
message appears on
the screen and if you
select Continue, this
message displays.
The lifespan of the
Toner is empty.
toner cartridge which
Replace toner
the arrow indicates is
cartridge
reached.
The toner cartridge is
Toner is low. Order
almost empty.
new toner cartridge
The stacker is full of
Too much paper in
printouts.
finisher stacker.
Remove printed
paper
SUGGESTED
SOLUTIONS
Install the staple
cartridge following the
steps explained on the
back of the finisher
door. (See "Replacing
the Stapler" on
page 123.) If you want
to continue the print job
and disregard of this
error message, go to
Admin Setting to
adjust the option. (See
"General settings" on
page 83.)
Turn the machine off
and turn it on again. If
the problem persists,
please call for service.
Check the IP address
or obtain a new IP
address.
Install a Samsung-
genuine toner cartridge,
designed for your
machine.
Try to reinstall the toner
cartridge.
Rplace a toner
cartridge with a
Samsung-genuine
toner cartridge. (See
"Replacing the toner
cartridge" on page 95.)
This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace the
toner cartridge with a
Samsung-genuine
toner cartridge. (See
"Replacing the toner
cartridge" on page 95.)
Ensure a replacement
cartridge is in stock.
Remove printouts from
the stacker.
Troubleshooting_ 109