Understanding The Status Led - Samsung SCX-6545NX User Manual

Interrupt button
When you press this button, the machine goes into interrupt mode which
means it stops a printing job for urgent copy job. When the urgent copy job
completes, the previous printing job continues.
STATUS
The machine is not in interrupt printing mode.
Off
The machine is in interrupt printing mode.
Blue On
Interrupt mode is resumed at default value (Off) after the machine is
shut down or reset.

UNDERSTANDING THE STATUS LED

When the problem occurs, the Status LED indicates the machine's
condition by the light color of it's action.
STATUS
• The machine is off-line.
Off
• The machine is in power save mode. When
data is received, or any button is pressed, it
switches to on-line automatically.
Blinking • When the backlight slowly blinks, the machine
Green
is receiving data from the computer.
• When the backlight blinks rapidly, the
machine is printing data.
The machine is on-line and can be used.
On
Blinking • A minor error has occurred and the machine is
Red
waiting the error to be cleared. Check the
display message. When the problem is
cleared, the machine resumes.
• The toner cartridge is low. Order a new toner
cartridge. You can temporarily improve print
quality by redistributing the toner. (See
"Replacing the toner cartridge" on page 95.)
• The imaging unit is totally out of lifespan.
On
Remove the old imaging unit and install a new
one. (See "Replacing the imaging unit" on
page 96.)
• The toner cartridge is totally empty. Remove
the old toner cartridge and install a new one.
(See "Replacing the toner cartridge" on
page 95.)
• A paper jam has occurred. (See "Clearing
paper jams" on page 101.)
• The cover is opened. Close the cover.
• There is no paper in the tray. Load paper in
the tray.
• The machine has stopped due to a major
error. Check the display message. (See
"Understanding display messages" on
page 107.)
DESCRIPTION
DESCRIPTION
Check the message on the display screen, and follow the instruction
on the message or refer to Troubleshooting part. See
"Troubleshooting" on page 99. If the problem persists, call for service.
Introduction_ 21