Manual Breast Pump Parts Guide; Cleaning The Manual Breast Pump - Philips SCF312/01 User Manual

Single electronic breast pump
Hide thumbs Also See for SCF312/01:
Table of Contents

Advertisement

Available languages

Available languages

Pumping with Your Electronic Breast Pump
5
6
7
CONSULT THE GUIDELINES FOR STORING EXPRESSED BREAST MILK ON PAGE 21
15
Changing or Ending your Pumping Session:
To change your pumping rhythm at any time, press the
One-touch Memory Control to revert to manual control
(solid
GREEN
light). You can then set a new pattern by
repeating Step 4.
To end your pumping session, press the One-touch
Memory Control to revert to manual control (solid
GREEN
light). Break the seal between your breast and
the pump funnel with your finger and remove the pump
from your breast. Turn the pump off by pressing and
holding the control button until the light goes off.
Remove the plug from the electrical outlet if necessary,
then remove the power cord from the control handle.
Storing your milk:
Make sure that you have not over-filled the milk
container and carefully unscrew it from the pump
body. Add a sanitized screw ring and sealing disc
to safely store your breast milk in the
refrigerator or freezer.
Next time you turn your pump on:
Resuming saved session? Even after your Electronic Breast
Pump is turned off, it will remember the last programmed
rhythm. If you have had a short break and your milk is still
flowing, ensure you have a good seal against your
breast, press the One-touch Memory Control and
your pump will continue as before.
Need to re-establish let-down? If you need to re-establish
let-down, refer to the beginning of 'Pumping with Your
Electronic Breast Pump' on page 13.
Manual Breast Pump – Parts Guide
While the Manual Breast Pump uses many of the same parts as the Electronic Breast
Pump, please note the parts shaded in green are specific to the Manual Breast Pump.
Parts specific to the Manual
Breast Pump are included in
a separate bag:
p
Clear pump cover
h
q
Forked handle
Manual Breast Pump

Cleaning the Manual Breast Pump

CAUTION: DO NOT USE ANTIBACTERIAL OR ABRASIVE CLEANERS/
DETERGENTS. TO CLEAN THE VALVE, RUB GENTLY BETWEEN YOUR
FINGERS IN WARM SOAPY WATER – DO NOT INSERT OBJECTS AS THIS
MAY CAUSE DAMAGE.
Every time before use (including first use):
Disassemble and clean all parts of the Manual Breast Pump on the top
rack of the dishwasher, or in warm soapy water and rinse. All parts of
the Manual Pump are sterilizer safe. Sanitize your Manual Pump in a
steam sterilizer, or by boiling in water for 5 minutes.
Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT
p
q
b
c
g
d
e
e
f
16

Advertisement

Table of Contents
loading

Table of Contents