Connecting The Electronics - Philips SCF312/01 User Manual

Connecting the Electronics

Parts you will need for steps 5-8:
Assembled
Pump Body
(see pages 9-10)
Wall Plug Cord
11
Control Handle
Battery Pack
5
Firmly push the control handle onto
the pump body so that it sits securely
on top of the silicone diaphragm.
6
For electric use connect the wall
plug cord to the control handle and
plug into an electrical wall outlet.
7
For battery use, open the top of
the battery pack and insert 4 x AA
batteries. (For compatible batteries,
see page 2).
Connect the power cord to
the control handle.
HELPFUL TIP!
Batteries will last for approximately 6 hours. The light
on the control handle will display a continuous
pulsing flash to warn you when it is time to replace
them. There will be enough power for approximately
1 more pumping session, with no drop-off in
performance, before the pump switches itself off.
Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT
Connecting the Electronics
i
RED
12