Using The Dvd Player; Playing A Disc - Dynex DX-R20TR User Manual

Using the DVD player

4 Use the number buttons to enter the four-digit password. The default password is
0000.
5 Press the CH+ or CH– button to select an option, then press the VOL+ or VOL–
button to adjust the option.
• VERSION–Displays the V-CHIP broadcast source version.
• DIMENSION–The information displayed here varies depending on the V-CHIP
signal.
• CLEAR RRT–Clears the VERSION field.
Using the DVD player

Playing a disc

To play a disc:
1 Press the TV/DVD button to switch to DVD mode.
2 Press the OPEN/CLOSE button to open the disc tray.
3 Place a disc, label side up, into the disc tray. Your TV combo plays two different sizes of
discs. Make sure that you place the disc into the correct disc guide. If the disc is
inserted incorrectly when you close the tray, the disc or your TV combo may be
damaged.
4 Press the OPEN/CLOSE button to close the disc tray. Playback should start
automatically. If playback does not start automatically, press the PLAY/ENTER button.
5 If a disc menu opens, press the
press the PLAY/ENTER button.
, , , or button to select a menu option, then
47