Dynex DX-R20TR User Manual page 18

16
To connect a combination VHF/UHF antenna with separate VHF and UHF 300 ohm
twin-lead wires:
1 Connect the UHF 300 ohm twin-lead wire to the combiner (not included).
RF IN jack
Combiner
2 Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer.
3 Attach the transformer to the combiner, then attach the combiner to the RF IN jack on
the back of your TV combo.
To connect separate VHF and UHF antennas (75 ohm VHF and 300 ohm UHF twin-lead
wires:
1 Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wires to the combiner (not
included).
RF IN jack
Combiner
2 Attach the combiner to the RF IN jack on the back of your TV combo.
UHF 300 ohm
UHF 300 ohm
twin-lead wire
Setting up your TV combo
VHF 300 ohm
300-75 ohm
matching
transformer
VHF 75 ohm
cable