System Requirements - Epson DYO-211/212 (FDD User Manual

Single-chip LSI design that integrates the control and
read/write circuits, minimizes the number of components
required, and ensures reliability.
This manual explains how to install and configure your DYO
dual drive. It does not cover MS-DOS,® Windows™ '95, OS/2®
Warp, or the operation of PCMCIA card and socket services
software; see the manuals that came with these programs for
instructions.

System Requirements

To use the DYO 211 or 212, you must have the following:
An IBM® compatible 386 or 486
MS-DOS version 5.0 or later, OS/2 Warp, or
Windows '95
One available 16-bit ISA option slot
At least 640KB of RAM
Card and socket services software (DOS-based systems
only) for allocating system resources such as
communications (COM) ports and interrupt (IRQ) settings,
and controlling the PCMCIA slot(s) containing the PC
card(s).
a