Installing The Drive - Epson DYO-211/212 (FDD User Manual

5. Secure the controller card to the computer using the screw
you removed in step 3.
Once the controller card is secure, you can install the dual drive.

Installing the Drive

before you can install the DYO dual drive, you must first
remove the faceplate or existing drive from the half-height
drive bay of the computer. See the documentation that came
with your computer for information on how to remove a
faceplate or a drive. Then follow the steps below (along with
those in your computer manual) to install the dual drive in the
half-height drive bay.
1. Locate the twin connectors at one end of the PCMCIA ribbon
cable. These connectors are identical to each other, and are
shown below.
2. Locate the twin connector sockets on the DYO drive, as
shown above.
8