Table of Contents
Advertisement
3. Position the power supply cable connector so that its red
wire aligns with pin 1 of the power supply connector on the
dual drive.
Note
If the computer's power cable connector is too big for
the power supply connector on the dual drive, connect
the power cable connector to the adapter for the power
supply connector (included with the dual drive), then
connect the adapter to the power supply connector on
the dual drive.
4. Make sure the connector holes fit over all the pins; then
push in the connector.
Caution
If you do not align the power supply and diskette drive
cable connectors correctly when you push them m, you
could severely damage the dual drive.
11
Advertisement
Table of Contents
