Epson EasyMP.net Network Option Board Installation Manual page 20

Setting up EasyMP.net
3
Set each item using the on-screen keyboard by referring to the following
table.
Item
DHCP
IP address
Subnet mask
Gateway
address
Primary DNS
Secondary DNS
WINS1
WINS2
DNS domain name Enter the DNS domain name.
ESSID
WEP
Ad-hoc Mode
20
Explanation
Select "ON" to use the DHCP.
Enter the fixed IP address.
Enter the subnet mask.
Enter the IP address of the default gateway.
Enter the primary IP address of the DNS.
Enter the secondary IP address of the DNS.
Enter the primary IP address of the WINS server.
Enter the secondary IP address of the WINS server.
Enter the ESSID of the wireless LAN unit.
Select "Enabled" and enter a WEP key for ciphering
of data to be sent.
Enter a WEP key consisting of ASCII characters : 5
or 13 characters, or of hexadecimal numbers:10 or 26
characters. (No key ID is required because only one
WEP key can be defined.)
Select "Enabled" to use ad-hoc access.