Solutions When The Interactive Pen Position Is Not Accurate; Solutions When The Interactive Pens Are Slow Or Difficult To Use - Epson BrightLink 425Wi User Manual

Solutions When the Interactive Pen Position Is Not Accurate

If the pen position is not the same as the cursor, try the following solutions:
• Try recalibrating.
• If you use the E-Zoom + button on the remote control to enlarge the image, the pen position is not
accurate. When you return to the original size, the position should be correct.
Parent topic:
Related tasks
Calibrating the Projector

Solutions When the Interactive Pens are Slow or Difficult to Use

If the pens are difficult to use or respond too slowly, try the following solutions:
• For easier operation, hold the pen at an angle to the projection surface.
• For the best performance, connect your computer to the projector using an HDMI or VGA cable. Using
a USB cable to display your computer image (USB Display) may slow interactive pen function.
• Dim the room lights and turn off any fluorescent lights. Make sure the projection surface and
interactive module are not in direct sunlight or other sources of bright lighting.
• Make sure the receiver window on the interactive module is clean and free from dust.
• Make sure there is no interference from infrared devices such as infrared remote controls, infrared
microphones, and infrared mice.
• Make sure the location is free from electromagnetic interference from nearby equipment (such as
electric motors or transformers).
• Make sure you have calibrated the system. Try recalibrating.
Parent topic:
Related tasks
Connecting to a Computer for VGA Video
Connecting to a Computer for HDMI Video and Audio
Calibrating the Projector
Solving Interactive Pen Problems
Solving Interactive Pen Problems
176