Setting Up The Projector; Projection Distance; Projector Connections - Epson BrightLink 425Wi User Manual

Setting Up the Projector

Follow the instructions in these sections to set up your projector for use.

Projection Distance

Projector Connections

Installing Batteries in the Remote Control
Installing Batteries in the Interactive Pens
Projection Distance
The distance at which you place the projector from the screen determines the approximate size of the
image. The image size increases the farther the projector is from the screen, but can vary depending on
the zoom factor, aspect ratio, and other settings.
Refer to the tables in the Installation Guide to determine approximately how far to place the projector
from the screen based on the size of the projected image. (Conversion figures may have been rounded
up or down.) You can also use the projector Throw Distance Calculator at
(U.S.) or www.epson.ca/support
Parent topic:
Projector Connections
You can connect the projector to a variety of computer, video, and audio sources to display
presentations, movies, or other images, with or without sound.
• Connect any type of computer that has a USB port, standard video output (monitor) port, or HDMI port.
• For video projection, connect devices such as DVD players, gaming consoles, digital cameras, and
camera phones with compatible video output ports.
• If your presentation or video includes sound, you can connect audio input cables, if necessary.
• For slide shows without a computer, you can connect USB devices (such as a flash drive or camera)
or an optional EPSON document camera.
Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode
to ensure the projector's internal temperature is regulated properly.
Connecting to the Interactive Module
Connecting to Computer Sources
(Canada).
Setting Up the Projector
27
www.epson.com/support