Maintaining And Transporting The Projector; Projector Maintenance; Cleaning The Lens And Receiver Window - Epson BrightLink 425Wi User Manual

Maintaining and Transporting the Projector

Follow the instructions in these sections to maintain your projector and transport it from place to place.

Projector Maintenance

Transporting the Projector
Projector Maintenance
Your projector needs little maintenance to keep working at its best.
You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector
from overheating due to blocked ventilation.
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part
needs replacing, contact Epson or an authorized EPSON servicer.
Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open
any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages
in the projector can injure you severely.
Warning: Do not try to service this product yourself, except as specifically explained in this manual.
Refer all other servicing to qualified servicers.

Cleaning the Lens and Receiver Window

Cleaning the Projector Case
Air Filter and Vent Maintenance
Projector Lamp Maintenance
Replacing the Remote Control Batteries
Replacing the Pen Batteries
Parent topic:
Cleaning the Lens and Receiver Window
Clean the projector's lens and the interactive module's receiver window periodically, or whenever you
notice dust or smudges on either surface.
• To remove dust or smudges, gently wipe the lens or receiver window with lens-cleaning paper.
Maintaining and Transporting the Projector
146