Replacing The Remote Control Batteries - Epson BrightLink 425Wi User Manual
Brightlink 425wi interactive wxga 3lcd projector with wall mount
Hide thumbs
Also See for BrightLink 425Wi:
- Installation manual (60 pages) ,
- Specifications (10 pages) ,
- Installation manual (60 pages)
Table of Contents
Advertisement
Related tasks
Replacing the Lamp
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1. Open the battery cover as shown.
2. Remove the old batteries.
Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on
your hands. If it gets on your hands, wash them immediately to avoid injury.
157
Advertisement
Table of Contents
