Sending A Fax From The Control Panel - Epson WorkForce WF-3520 Quick Manual

Entering Your Phone Number
1. Select
Your Phone Number
2. Use the keypad to enter your phone number, up to 20
digits. You don't need to use dashes. Use the # button
to type the + symbol for an international number.
Press l to delete a character.
3. Press
OK
Selecting the Number of Rings to Answer
If you connected an answering machine and it is set to pick up on the fourth ring, you
should set the product to pick up on the fifth ring or later:
1. Press , if necessary, then press l or r, select
2. Press d and select
3. Select
Communication
4. Press u or d to select the number of rings, then press
Note: Set the fax to answer one ring after the answering machine.

Sending a Fax From the Control Panel

You can send a fax by manually entering a fax number, as described below.
Note: To dial the number using a telephone, by redialing, or by selecting from your
speed dial list, see the next section. To send a fax from your computer using the Epson
FAX Utility, see your online User's Guide.
1. Place your original(s) for faxing (see page 6).
2. Press , if necessary, and select
To fax a two-sided document, place your document
in the ADF. Press d on the Fax screen, then select
Send Settings
.
On
3. Use the numeric keypad to enter the fax number (up
to 64 digits). Then press
18
Sending a Fax From the Control Panel
to return to the Header menu.
Fax Settings
, then
. Select
2-Sided Faxing,
Done
from the Header menu.
Setup
.
Rings to Answer.
.
Fax
then select
.
, and press .
OK
.
OK